Best IM42I50W Installation Guide download pdf (Page 5)

- 5 -

HALOGEN BULBS

This range hood requires two halogen bulbs

(Type MR11, 12 Volt, 20 Watt Max, G4 2-pin

Base).

WARNING: Always switch off the

electrical supply before carrying out any

operation on the appliance.

To remove old bulbs:

Pull downward (DO NOT ROTATE). Fig. 2.

CAUTION: Bulbs may be hot.

To install new bulbs:

Align pins with holes in lamp socket. Push bulb up until securely seated. Use only Type MR11,

12 Volt, 20 Watt Max., G4 2-pin base replacement bulbs.

FIG. 2

CLEANING AND MAINTENANCE

Proper maintenance of the Range Hood will assure proper performance of the unit.

Motor

The motor is permanently lubricated and never needs oiling. If the motor bearings make excessive or

unusual noise, replace the motor with the exact service motor. The impeller should also be replaced.

Grease Filter

The grease filter should be cleaned frequently. Use a warm detergent solution. Grease filter is dishwasher

safe.

Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may

occur if using phosphate detergents, or as a result of local water conditions - but this will not affect filter

performance. This discoloration is not covered by the warranty.

See “INSTALL FILTERS” section for removal and installation instructions.

Non-ducted Recirculation Filter

The non-ducted recirculation filter should be changed every 6 months. Replace more often if your

cooking style generates extra grease, such as frying and wok cooking. See “INSTALL FILTERS” section

for removal and installation instructions.

Stainless Steel Cleaning

DO:

• Regularly wash with clean cloth or rag soaked

with warm water and mild soap or liquid dish

detergent.

• Always clean in the direction of original polish

lines.

• Always rinse well with clear water (2 or 3 times)

after cleaning. Wipe dry completely.

• You may also use a specialized household

stainless steel cleaner.

DON’T:

•

Use any steel or stainless steel wool or any

other scrapers to remove stubborn dirt.

• Use any harsh or abrasive cleansers.

• Allow dirt to accumulate.

• Let plaster dust or any other construction

residues reach the hood. During construction/

renovation, cover the range hood to make sure

no dust sticks to the stainless steel surface.

Avoid: When choosing a detergent

• Any cleaners that contain bleach will attack stainless steel

• Any products containing: chloride, fluoride, iodide, bromide will deteriorate surfaces rapidly.

• Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly

explosive and should never be used close to a range.

1 2 3 4 5 6 7 8 9 10 ... 47 48

Comments to this Manuals

No comments

Best IM42I50W Installation Guide Page 5

Comments to this Manuals

Related products and manuals for Cooker hoods Best IM42I50W