Best WP28M30SB Installation Manual download pdf (Page 7)

4. INSTALL BACKSPLASH (OPTIONAL)

6. INSTALL WOOD MOUNTING STRIP

WARNING

Due to the weight of this hood, ensure that the wood strip is

attached to all of the available studs (2 studs minimum for a

30’’ width hood, more as hood width increases); not into the

drywall alone.

Measure and mark a level line on wall above cooktop location for the wood

mounting strip (see illustration under step 2 for dimensions). Remove wood

mounting strip from back of hood.

Center wood mounting strip over location. Use no. 10 - 2’’ flat head screws

to secure the mounting strip to the drywall. Make sure to hit the wall studs.

Backsplash must be installed before the hood shell because the hood shell covers the backsplash top mounting screws. In order to be

able to install the backsplash, make sure you have at least 18’’ clearance between bottom of hood and range control panel or cooktop.

(See instructions packed with backsplash.)

HD0046

WOOD STRIP

(CENTERED HORIZONTALLY AND SECURED

TO WALL STUDS OR FRAMING)

LEVEL LINE

(SEE PAGE 6

FOR DIMENSIONS)

5. REMOVE HYBRID BAFFLE FILTERS

Remove tape on filters.

Remove filters from hood and set aside.

NOTE: It is recommended to start with the center one.





HD0547

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

No comments

Best WP28M30SB Installation Manual Page 7