Best WPB9IQT48SB Installation Guide download pdf (Page 11)

- 11 -

WIRING

Note: This range hood must be properly

grounded. The unit should be installed by a

qualified electrician in accordance with all

applicable national and local electrical

codes.

1. Remove the wiring box cover. Remove a

knockout from the wiring box (Fig.10).

2. Secure the conduit to the wiring box

through a conduit connector.

3. Make electrical connections. Connect white

to white, black to black and green to green.

4. Replace wiring box cover and screws. Make

sure that wires are not pinched between

cover and box.

WIRING BOX

COVER

FIG.10

MOUNT THE DUCT COLLAR

Fix the duct collar to blower discharge with 2

screws (3.9x9.5mm), the screws are located

in the Hardware Package (Fig. 9).

FIG. 9

MOUNTING SCREWS 3.9x9.5mm

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comments to this Manuals

No comments