Best K29 User Manual download pdf (Page 10)

- 10 -

WIRING

Note: This range hood must be properly

grounded. The unit should be installed by a

qualified electrician in accordance with all

applicable national and local electrical

codes.

1. Remove the wiring box cover. Remove a

knockout from the wiring box.

2. Feed 6" of power cable through the knock-

out opening and secure cable to the wiring

box with an appropriate connector.

3. Make electrical connections. Connect

white to white, black to black and green to

green.

4. Replace wiring box cover and screws.

Make sure that wires are not pinched be-

tween cover and box.

DUCT COLLAR

WIRING BOX

COVER

PREPARE THE HOOD

(CONTINUED)

NON-DUCTED CONFIGURATION ONLY

7. Carefully place the lower flue into the

recessed area of the range hood.

8. Carefully slide the upper flue down

inside the lower flue.

9. Secure the recirculation plenum to the

upper flue with (4) flat head screws.

UPPER

FLUE

PLENUM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments