Best WTT32I36SB Installation Manual download pdf (Page 17)

- 17 -

12. Measure and install section of flexible metal ductwork (included with

ANKWTT320 or ANKWTT326) to damper/duct connector and bottom of non-

duct plenum. Use duct tape to make all joints secure and air tight.

CAUTION

Do not use plastic duct.

13. Plug power cord into wall outlet.

14. Slide the upper decorative flue section into the lower decorative flue section.

NOTE

For non-ducted

applications, the

upper flue should

be oriented so the

louvers are towards

the ceiling.

15. Carefully place the

upper/lower flue

assembly into the

recessed area of

the hood.

16. Slide the upper

flue upward until it

is aligned with the

non-duct plenum.

The non-duct

plenum should

be inside the flue.

Secure the upper

flue to the non-duct

plenum using (2) 4mm x 12mm mounting screws.

NOTE

9-10 ft. ceilings may require Flue Extension Model AEWTT32SB depending

on installation height (purchase separately). Discard the upper and lower

flues supplied with your hood and replace them with Flue Extension Model

AEWTT32SB.

DUCT LENGTH

DECORATIVE

FLUE

8” ROUND

FLEXIBLE

METAL DUCT

NON-DUCT

PLENUM

DAMPER / DUCT

CONNECTOR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 67 68

Comments to this Manuals

No comments

Best WTT32I36SB Installation Manual Page 17

Comments to this Manuals

Related products and manuals for Cooker hoods Best WTT32I36SB