Best UP26M30SB Installation Manual download pdf (Page 14)

19. OPERATION

HEAT SENTRY™

This hood is equipped with a Heat Sentry™ thermostat. This thermostat is a device that will turn on or speed up the blower if it senses

excessive heat above the cooking surface.

1) If blower is OFF - it turns blower ON to HIGH speed.

2) If blower is ON at a lower speed setting – it turns the blower up to HIGH speed.

When the temperature level drops to normal, the blower will return to its original setting.

WARNING

The HEAT SENTRY can start the blower during a range top fire or other excessive heat situations even if the hood

is turned off. In this case, it is impossible to turn the blower OFF with blower switch. If you must stop the blower,

unplug the blower power cord (located behind the filters) from the hood by pulling on its 2-prong connector; do

not pull on the wire.

Always turn your hood on before you begin cooking to establish an air flow in the kitchen. Let the blower run for a few minutes to clear the

air after you turn off the range. This will help keep the whole kitchen cleaner and brighter.

HC0038

HC0039

1) HALOGEN LIGHT KNOB

2) BLOWER SPEED CONTROL KNOB

3) ON/OFF BLOWER SWITCH

1) HALOGEN LIGHT KNOB

2) BLOWER SPEED CONTROL KNOB

COOKTOP LIGHTING (HALOGEN)

A rotary 3-position knob (1) controls the halogen lights (OFF - low intensity - high intensity).

BLOWER

The blower is operated using two controls.

Use the on/off rocker switch (3) to start and stop the blower. When turned on, the blower operates at the previous setting of the speed

control (2).

Turn the speed control knob counterclockwise to increase blower speed – clockwise to decrease speed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Best UP26M30SB Installation Manual Page 14