Best UP26M30SB Installation Manual download pdf (Page 7)

6. CHOOSE THE OPENING (P5 AND P8 BLOWERS ONLY)

Removing horizontal knockout opening on back of hood.

CAUTION

If using P5 blower, remove 10” wide knockout. If using P8 blower, remove either 10” or 14” wide knockout.

Remove the knockout for the chosen opening (horizontal at the back of the hood or vertical on rough-in plate). See pictures below.

14” KNOCKOUT

10” KNOCKOUT

HD0076

”

KNOCKOUT

HD0077

10”

KNOCKOUT

Removing vertical knockout opening on rough-in plate.

5. REMOVE FILTERS AND BOTTOM PANEL (ALL BLOWERS)

Lay the hood flat on a table. Use a piece of cardboard to avoid

damaging the table or the hood.

Remove tape on filters. Remove filters from hood and set aside.

NOTE: It is recommended to start with the center one(s).

HD0542

HD0541

RETAINING SCREWS

BOTTOM PANEL

Remove bottom panel both retaining screws. Set bottom panel and screws aside.

HD0544

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

No comments

Best UP26M30SB Installation Manual Page 7