Best WTT32I36SB Installation Guide download pdf (Page 2)

- 2 -

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON(S)

OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer at the address or telephone number listed

in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel and lock

service disconnecting means to prevent power from being switch on accidentally.

When the service disconnecting means cannot be locked, securely fasten a

prominent warning device, such as a tag, to the service panel.

3. Installation work and electrical wiring must be done by qualified personnel

in accordance with all applicable codes and standards, including fire-rated

construction codes and standards.

4. Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent backdrafting.

Follow the heating equipment manufacturer’s guidelines and safety

standards such as those published by the National Fire Protection

Association (NFPA), the American Society for Heating, Refrigeration

and Air Conditioning Engineers (ASHRAE) and the local code authorities.

5. This product may have sharp edges. Be careful to avoid cuts and abrasions

during installation and cleaning.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and

other hidden utilities.

7. Ducted fans must always be vented to the outdoors.

8. To reduce the risk of fire, use only steel ductwork.

9. Do not use this unit with any other solid-state speed control device.

10. Do not operate any fan with a damaged cord or plug. Discard fan or return to

an authorized service facility for examination and/or repair.

11. GROUNDING INSTRUCTION: The appliance must be grounded. In the event

of an electrical short circuit, grounding reduces the risk of electric shock by

providing an escape wire for the electric current. The appliance is equipped with

a cord having a grounding wire with a grounding plug. The plug must be plugged

into an outlet that is properly installed and grounded. WARNING: Improper

grounding can result in a risk of electric shock. Consult a qualified electrician if

the grounding instructions are not completely understood, or if doubt exists as

to whether the appliance is properly grounded. Do not use an extension cord. If

the power supply cord is too short, have a qualified electrician install an outlet

near the appliance.

INTENDED FOR DOMESTIC COOKING ONLY

1 2 3 4 5 6 7 ... 67 68

No comments

Best WTT32I36SB Installation Guide Page 2